Page 7 - Mines and Minerals Reporter eMagazine - Volume November 2024
P. 7
UNDERGROUND COAL MINES
stress in the strata below a pillar than the overburden depth. the setting of step caving, the advancing of mining face can
Ju and Xu (2013) studied the structural characteristics of key be simulated. Specifically, in the model the inhomogeneity or
strata and strata behaviour of a fully mechanised longwall face heterogeneity of material is incorporated to obtain a collective
with 7.0 m height chocks and proposed a calculation method macroscopic behaviour different from those of the elements.
of working resistance for 7.0 m height chocks. Shibata et There are two levels of heterogeneity in rock mass, one being
al. (2014) described the applicability of the longwall mining the differences in properties between the rock block and the
system from final highwall and its suitable design taking the discontinuity such as joints (Wasantha et al. 2015) or fractures
slope stability into consideration and performed a preliminary (Noorian-Bidgoli and Jing 2015; Yakovlev et al. 2010) at a
study on design of long-wall mining from final highwall at Mae macro-scale, and the other being the heterogeneity within
Moh Lignite mine in Thailand using Flac3D. the intact rock blocks due to differences in the randomly
distributed flaws at a meso-scale. In the model, because the
Though extensive effort has been paid to understand the system was analysed at a mesoscale, the heterogeneity within
rupture and collapse of overburden strata and the abutment the intact rock blocks due to the differences in the degree of
stress redistribution patterns above coal face and key strata weathering and the randomly distributed flaws at a meso-
and around coal pillar, there remains unclear about the scale was taken into account. The mechanical properties such
dynamic mechanical state of a coal pillar and the nonlinear
behavior associated with mining-related rock mechanics
problems during the extraction of a longwall mining panel.
A thorough understanding of in situ stress environment is
essential for effective ground control during underground
mining. In particular, understanding the stress field around a
longwall panel and overburden strata movement law is one of
the key components that enables mining engineers to predict
potential failures. Thus, in this paper, the progressive damage,
fracture and collapse process of rock strata, from the initiation
and propagation of cracks firstly in the two heads and the
middle part of strata to rupture and collapse of strata, viz.,
weighting, is simulated to investigate the characteristics of
strata movement, surface subsidence and abutment stress
distribution above coal face and key layers as mining. The
work described in this paper has attempted to investigate the
rupture and collapse characteristics of overburden strata and
the redistribution of abutment stress patterns above coal face
and key strata during the underground mining based on the Fig. 1 Weibull distribution for element failure strength
geological condition of a typical longwall panel from a coal
mine.
as strength and Young’s modulus of the mesoscopic material
DESCRIPTION OF THE MODEL elements, which are assumed to be homogeneous and
isotropic, are assigned randomly from the Weibull statistical
distribution (Weibull 1951) as shown in Fig. 1.
The theory of elastic-damagemechanics is incorporated into
the model and the elastic and isotropic damage is assumed in
the rock failure process analysis (abbreviated as RFPA) model.
The model accounts for material heterogeneity to obtain
a collective macroscopic behaviour different from those of
the elements through a stochastic local failure stress field. where u is the mechanical parameter of individual element
There are four features distinguishing it from other numerical such as failure strength or elastic modulus and u is a scale
0
model: (1) by introducing heterogeneity of rock properties parameter relative to the mechanical parameter of all
into the model, it can simulate non-linear deformation of a elements, i.e., the mean mechanical property of the elements
quasi-brittle behavior with an ideal brittle constitutive law for for the specimen m is defined as the homogeneity index of
the local material, (2) by introducing degradation of material the material. According to the definition, a larger m implies a
parameters after element failure, it can simulate strain- more homogeneous material and vice versa.
softening behavior, (3) by recording the event accounts and
event rates of failed elements, the seismicities associated The maximum tensile strain criterion and a modified Mohr–
with the progressive failure in rock can be simulated, (4) by Coulomb criterion with a tension cut-off are adopted as two
NOVEMBER 2024 / MINES & MINERALS REPORTER 5

